Aqara
Automation basicsAqara FP2 Review: Zones, Wi-Fi, Wiring & FP300
Current buying option
Aqara Presence Sensor FP2 mmWave Radar Wired Smart Motion Sensor
Current price & availability · purchase link
Open the named listing to compare the live price, availability, delivery, seller, and return terms.
A wired 2.4GHz Wi-Fi mmWave presence sensor built around room mapping, up to 30 zones, multi-person positioning, and platform integrations without an Aqara hub, with important placement, power, privacy, and fall-detection limits.
Decide before the product image
- Best for
- Mapped living rooms, bedrooms, or offices with several automation zones
- Verify on Amazon US
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, included cable and mount, live price, and availability.
Direct answer to the buying question
Is Aqara FP2 worth its wired setup for zones and room presence?
FP2 is justified when one powered sensor can cover meaningful zones and the room supports careful placement and calibration. It is a poor fit when a battery sensor, simple motion trigger, or privacy-minimal setup is enough. Check Wi-Fi, app, mounting, reflection, zone and ecosystem requirements before buying.
Continue this decision
Decision 1
Aqara FP300 vs FP2: Battery, Zones, Thread & Wi-Fi
Compare battery versus wired power, Thread or Zigbee versus Wi-Fi, single-zone presence versus mapped zones, environmental sensors, multi-person positioning, and setup effort.
Decision 2
Aqara FP300 Review: Price, Battery, Thread & FP2
A model-specific guide to Aqara's battery-powered FP300, including PIR plus 60GHz mmWave sensing, light, temperature and humidity readings, Thread versus Zigbee setup, battery expectations, mounting, and the limits that separate it from the wired FP2.
Decision 3
Aqara Hub M3 Review: Matter, Thread, PoE & M2 Upgrade
A source-backed Aqara Hub M3 review covering Matter controller and bridge roles, Thread border routing, Zigbee migration, Home Assistant, PoE, infrared control, and whether M2 owners should upgrade.
Decision 4
mmWave Presence Sensors: Setup and Daily Workflow
A direct workflow answer for mmwave presence sensors: decide whether the product can detect stationary occupancy where a PIR sensor would time out, verify all four model-level conditions, and keep the choice reversible when the room geometry cannot isolate the target area or the automation has safety consequences when presence is wrong.
Decision 5
Matter Starter Kit: Hub, Contact Sensor and Smart Plug
Build a small Matter setup with Aqara Hub M3, Aqara P2, and Tapo P125M while keeping Thread, Wi-Fi, controllers, and ecosystem sharing clear.
Related search answers
Buying assessment
Use the decision points below to compare fit, compatibility, ownership trade-offs, and the exact current listing.
Quick verdict
Best fit
Mapped living rooms, bedrooms, or offices with several automation zones
Main upside
Maps up to 30 zones in a room
Check first
Needs continuous USB power and 2.4GHz Wi-Fi
What matters most
- Updated
- August 13, 2026
- Decision scope
- Fit, compatibility, ownership, and current-listing checks
- Version risk
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, cable, mount, and region before checkout
- Price or bundle risk
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, included cable and mount, live price, and availability.
Current product and listing
- Current listing
- Amazon ASIN B0BXWZMQJ3
- Product name
- Aqara Presence Sensor FP2 mmWave Radar Wired Smart Motion Sensor
- Model or bundle
- PS-S02E / Presence Sensor FP2
- Confirm before buying
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, cable, mount, and region before checkout
- Live buying conditions
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, included cable and mount, live price, and availability.
What can change before checkout
- Page updated
- August 13, 2026
- Exact product
- Amazon ASIN B0BXWZMQJ3
- Price and availability
- Check the merchant page for the current price, coupon, stock, and delivery
- Seller and returns
- Confirm the selected seller, included bundle, warranty path, and return terms before ordering
Product facts
- Exact product
- Aqara Presence Sensor FP2 mmWave Radar Wired Smart Motion Sensor
- Brand
- Aqara
- Best use case
- Mapped living rooms, bedrooms, or offices with several automation zones
- Category
- automation
- ASIN
- B0BXWZMQJ3
- Price band
- $$
Compatibility checks
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, cable, mount, and region before checkout
- Plan a permanent USB power route and verify 2.4GHz Wi-Fi at the mounting point
- Calibrate room edges, entrances, interference areas, and each automation zone after mounting
- Treat fall detection as a consumer notification feature, not medical monitoring or emergency response
Key specifications
| Spec | Value to verify |
|---|---|
| ASIN | B0BXWZMQJ3 |
| Model | PS-S02E / Presence Sensor FP2 |
| Detection | 60GHz mmWave |
| Network | 2.4GHz Wi-Fi |
| Power | Wired USB-C |
| Coverage | Up to 40m² listed room coverage |
| Zones | Up to 30 configurable zones |
| Multi-person | Up to 5 targets listed |
Fit decision guide
Best when
Your priority is mapped living rooms, bedrooms, or offices with several automation zones and the exact listing matches the specs below.
Main trade-off
Needs continuous USB power and 2.4GHz Wi-Fi
Also compare
Choose Aqara FP300 for a compact battery-powered single-zone sensor with Thread or Zigbee.
Confirm before checkout
Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, cable, mount, and region before checkout
Bottom line
FP2 is the better Aqara sensor for a large room with distinct activity zones or multiple people. It asks for more setup, a permanent cable, and careful calibration than FP300, so a simple single-zone automation may not justify the extra complexity.
Why it matters
One FP2 can expose multiple room zones as separate occupancy signals, which can replace several basic sensors when the room layout and automation rules are stable.
Zones are the reason to choose FP2
A single FP2 can represent a desk, sofa, bed, or doorway as separate zones. That is materially different from using one occupancy signal for the entire room and is the main reason to accept its wired installation and longer setup.
Placement and calibration are part of ownership
Room shape, mirrors, moving fans, curtains, pets, and the sensor's angle can change results. Mount first, draw the room and interference zones, then observe real arrivals, seated periods, and departures before using the signal for essential automations.
Fall mode has strict boundaries
Aqara's fall mode requires ceiling mounting and cannot be treated as a medical device, guaranteed event detector, or emergency service. Anyone who needs health or safety monitoring should use appropriate professional guidance and a separate response plan.
Who should skip it
Skip FP2 when a cable is impractical, the room only needs one occupied-or-empty signal, 2.4GHz Wi-Fi is unreliable, or the household will not maintain zone calibration after furniture changes.
Where it wins
- Maps up to 30 zones in a room
- Supports multi-person positioning and stationary presence detection
- Uses Wi-Fi and does not require an Aqara hub for listed integrations
Trade-offs
- Needs continuous USB power and 2.4GHz Wi-Fi
- Calibration and room edges can require repeated tuning
- Fall detection uses a different ceiling-mounted mode and is not a medical system
What to verify
- Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, cable, mount, and region before checkout
- Plan a permanent USB power route and verify 2.4GHz Wi-Fi at the mounting point
- Calibrate room edges, entrances, interference areas, and each automation zone after mounting
- Treat fall detection as a consumer notification feature, not medical monitoring or emergency response
Who should buy it
Consider Aqara Presence Sensor FP2 mmWave Radar Wired Smart Motion Sensor if your priority is mapped living rooms, bedrooms, or offices with several automation zones and you want a product that fits your smart-home setup without adding unnecessary complexity.
Also compare
- Choose Aqara FP300 for a compact battery-powered single-zone sensor with Thread or Zigbee.
- Choose a basic motion sensor when rapid motion detection is enough and the room does not need stationary presence.
Compare nearby options
| Product | Best for | Check first | Price band | Exact listing |
|---|---|---|---|---|
| Aqara Presence Sensor FP2 mmWave Radar Wired Smart Motion Sensor | Mapped living rooms, bedrooms, or offices with several automation zones | Needs continuous USB power and 2.4GHz Wi-Fi | $$ | ASIN B0BXWZMQJ3 |
| Aqara Presence Sensor FP300 Wireless 5-in-1 Motion Sensor | Single-zone presence automation where a power cable would be awkward | Does not provide FP2-style multi-zone room mapping | $ | ASIN B0FG2MD3YP |
| Aqara Hub M3 | Aqara-centered homes that need Thread, Matter bridging, and wired PoE placement | Supported third-party Matter device types and bridged features remain narrower than each vendor's native app | $$ | ASIN B0CWLHSKYC |
Aqara
Aqara Presence Multi-Sensor FP300
Single-zone presence automation where a power cable would be awkward
Aqara
Aqara Hub M3
Aqara-centered homes that need Thread, Matter bridging, and wired PoE placement
Comparisons featuring this product
Version and price risk
Treat the exact listing as part of the product. Confirm the model number, hardware revision, included accessories, seller, coupon state, and return path before checkout. Current link note: Confirm ASIN B0BXWZMQJ3, PS-S02E, seller, included cable and mount, live price, and availability.
Before you buy
- Confirm the exact model, region, wiring or door fit, required hub, and supported ecosystem before ordering.
- Check the retailer listing, seller, bundle contents, return window, and subscription boundaries.
- Keep a dependable local fallback for entry, climate, cameras, and essential automations.
- Check for recurring quality-control patterns after confirming the exact model.
Sources and methodology
We have not tested this sensor ourselves. This guide synthesizes Aqara's FP2 documentation and the exact Amazon listing; calibration, room geometry, Wi-Fi quality, detection behavior, and fall-mode suitability need to be tested in the intended room.
References checked
- Aqara Presence Sensor FP2 — Official room, zone, power, Wi-Fi, multi-person, and mode information.
- Aqara FP2 Amazon listing — Exact US ASIN, PS-S02E identity, title, and seller check.